Features
- 5 digital V / A / W Meter can be displayed on Large LCD display simultaneously
- Flexible CC, CR, CV, CP, CV + CL, CV + PL, Dynamic and short circuit operation modes
- Not only CC, CR, and CP mode have parallel operation functions, but CV mode also has parallel operation functions
- Surge Test mode for Capacitive load for current rising transient test
- Max. dynamic mode slew rate：24 A/μs (6 kW model)；20 A/μs (5 kW model)；16 A/μs (4 kW model)
- Voltage meter display can be configured as polarity positive（”＋”）or negative(“－”）
- Master-slave control is up to 1 Master and 7 Slaves
- Optional Interface: GPIB, RS232, USB, LAN
- SEQ Load Mode's programmable function allows for ultra-high-speed step changes from 0.02 to 999000 ms in CC or CP mode
- Provide battery BMS protection test function
- Optional PEL-032 load current waveform generator to provide the battery actual discharge current waveform simulation
- Built-in test modes include Battery Discharge, BMS, Short circuit, OCP, OPP test modes
- Turbo mode can withstand up to 1.5 times the current and power electronic load within 2 sec. period, most fit BMS, Short circuit, OCP, OPP test
- Protection against V, I, W, and ℃
- Flexible CC, CR, CV, CP, CV + CL, CV + PL, Dynamic and short circuit operation modes
MORE DETAIL
CLOSE
If you can't see the YouTube video, please click here.
GW Instek PEL-5000G series single-channel electronic load provides 150 V/ 600 V/ 1200 V models with a power range of 4 kW to 6 kW. PEL-5000G has a total of 9 models featuring different combinations of power, voltage, and current. It can test and verify the specifications of batteries, electric vehicle chargers/charging stations and electric vehicle batteries. PEL-5000G supports parallel connection for same voltage specification and different power models. PEL-5000G can support up to 8 units connected in parallel to provide a maximum power of 48 kW.
For the scenario of Battery Charger testing, PEL-5000G specifically provides four battery discharge modes, namely CV+Current Limit test mode, CV+Power Limit test mode, CC mode and CP mode. Users can choose a suitable test mode according to the test requirements.
For Battery Discharge Function, users can set the discharge cut-off voltage, discharge time, or discharge capacity (Ah) in CC or CP mode to meet the battery testing requirements.
In order to meet the verification requirements of different DUTs, PEL-5000G provides a variety of test functions, Surge current test mode, automated OCP, OPP test functions and 150 sets of parameter storage function. The 1200 V model of PEL-5000G not only provides full power output at 1000 V, but also provides 60% power output at 1200 V output, which is higher than the 50% power output of other manufacturers of similar electronic loads.
High-voltage batteries or chargers directly connected to the electronic load may cause damage to the electronic load. PEL-5000G has a built-in slow starter, which not only protects the DC load, but also saves the user's installation cost and setting time for measurement on 600 V/1200 V models.
The communication interfaces supported by PEL-5000G include GPIB, RS232, USB, and LAN. The power, voltage and current of each model are shown in the following table:
|
Power / Voltage |
150 V |
600 V |
1200 V |
|||
|
4 kW |
PEL-5004G-150-400 |
(400 A) |
PEL-5004G-600-280 |
(280 A) |
PEL-5004G-1200-160 |
(160 A) |
|
5 kW |
PEL-5005G-150-500 |
(500 A) |
PEL-5005G-600-350 |
(350 A) |
PEL-5005G-1200-200 |
(200 A) |
|
6 kW |
PEL-5006G-150-600 |
(600 A) |
PEL-5006G-600-420 |
(420 A) |
PEL-5006G-1200-240 |
(240 A) |
Standard Accessories
SLS10B RED; PLUG CONN 20 A RED T × 1
SLS10B BLK; PLUG CONN 20 A BLK T × 1
PTV1-12；PIN TRML × 4
HD-DSUB 15pin MALE to MALE 150 cm × 1
RND SCREW M4x0.7+S+P L=20 mm × 4
Hexagon head M8*1.25 L=25 mm NI × 2
K-NUT M4X0.7 NI × 4
NUT M8X1.25 NI × 2
WASHER INSIDE DIA-8.5 OUTSIDE × 4
SPRING WASHER INSIDE φ8 × 2
PEL-5004G,PEL-5005G,PEL5006G handles ： PEL-028 × 1
Rack Mount Kit For PEL5004G,PEL-5005G,PEL-5006G ： PEL-031 × 1
Optional accessories
| PEL-030 | GPIB+RS232 interface |
| PEL-023 | RS232 interface |
| PEL-032 | Load current waveform generator with RS232 interface |
| PEL-022 | GPIB interface |
| PEL-025 |
USB interface + USB driver (The driver can be downloaded） |
| PEL-024 |
LAN interface + LAN driver (The driver can be downloaded） |
| GTL-250 GPIB Cable, 1 m | GPIB cable |
| GTL-248 GPIB Cable, 2 m | GPIB cable |
| GTL-246 USB Cable, 1.2 m | USB cable |
Ordering information
Normal mode*
- PEL-5004G-150-400 (150 V,400 A,4 kW)
- PEL-5005G-150-500 (150 V,500 A,5 kW)
- PEL-5006G-150-600 (150 V,600 A,6 kW)
- PEL-5004G-600-280 (600 V,280 A,4 kW)
- PEL-5005G-600-350 (600 V,350 A,5 kW)
- PEL-5006G-600-420 (600 V,420 A,6 kW)
- PEL-5004G-1200-160 (1200 V,160 A,4 kW)
- PEL-5005G-1200-200 (1200 V,200 A,5 kW)
- PEL-5006G-1200-240 (1200 V,240 A,6 kW)
Turbo mode*
- PEL-5004G-150-400 (150 V,600 A,6 kW)
- PEL-5005G-150-500 (150 V,750 A,7.5 kW)
- PEL-5006G-150-600 (150 V,900 A,9 kW)
- PEL-5004G-600-280 (600 V,420 A,6 kW)
- PEL-5005G-600-350 (600 V,525 A,7.5 kW)
- PEL-5006G-600-420 (600 V,630 A,9 kW)
- PEL-5004G-1200-160 (1200 V,240 A,6 kW)
- PEL-5005G-1200-200 (1200 V,300 A,7.5 kW)
- PEL-5006G-1200-240 (1200 V,360 A,9 kW)
* Regarding the product delivery date, please contact your regional sales representative.
User Manual
The user manual of PEL-5000G Series
2024-11-06
USB Driver
The USB Driver of AEL-5000/PEL-500/PEL-5000C/PEL-5000G
2024-10-01
PC Software
The PC Software of PEL-5000G/5000C/500
2024-10-01
Brochure
The Brochure of PEL-5000G Series
2023-06-09
3D Model
3D Model of the PEL-5000G, STEP format
2023-04-28
2D Drawing
2D Drawing of the PEL-5000G, DWG/PDF format
2023-04-28