Features
- Frequency Range: 9kHz ~ 3GHz
- High Frequency Stability: 0.025ppm
- 3dB RBW: 1Hz ~ 1MHz
- 6dB EMI Filter: 200Hz, 9kHz, 120kHz, 1MHz
- Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
- Built-in Measurement Functions: 2FSK Analysis, AM/FM/ASK/FSK Demodulation & Analysis, EMC Pre-test, P1dB point, Harmonic, Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO, Noise Marker, Frequency Counter, Time Domain Power, Gated Sweep
- Built-in Spectrogram and Topographic Display Modes
- 886MHz IF Output for User’s Extended Applications
- Remote Control Interface: LAN, USB, RS-232, GPIB (Optional)
- Built-in Preamplifier, 50dB Attenuator, and Sequence Function
- High Frequency Stability: 0.025ppm
GSP-9300 Spectrum Analyzer Demo Videos on YouTube
GSP-9300 is a light, compact and high C/P ratio 3GHz spectrum analyzer. The GSP-9300 frequency range stretches from 9kHz to 3GHz and features many functions such as radio frequency and power measurement, 2FSK digital communications analysis, EMC pretest, and active component P1dB point measurement, etc. It can support the fast sweep speed up to 307us. It is the ideal instrument for various application fields such as the basic operation of R&D, research and school lecture, engineering maintenance and test for mass production. This light and compact spectrum analyzer is also suitable for automatic test systems and vehicle mounted operation.
GW Instek understands that high quality is very important consideration for users who are selecting economical spectrum analyzers. GSP-9300, with the built-in preamplifier and the highest sensitivity of -152 dBm (1Hz), is capable of measuring very feeble signals. To obtain the accurate results, the low power measurement uncertainty of GSP-9300 is less than 1.5dB.
The built-in measurement functions of GSP-9300 spectrum analyzer unclude 2FSK digital communications analysis, AM/FM/ASK/FSK signal demodulation & analysis, EMC pretest mode, Harmonic Distortion, TOI, Channel Power, OCBW, ACPR, SEM, Phase Jitter, N-dB Bandwidth, Noise Marker, Frequency Counter and Time Domain power measurement for burst signal, etc.
Tracking generator, an option for GSP-9300 spectrum analyzer, provides supplementary functions such as measuring the insertion loss of RF cable and identifying the frequency response of antenna, filter or amplifier. The P1dB measurement function supports power sweep and P1dB compression point of active component. It supports 6.2GHz power sensor PWS-06. User, via the power meter mode, can conduct related measurement applications without using an independent power meter.
GSP-9300 spectrum analyzer is very user-friendly. All frequently used functions can be applied quickly through function keys and five languages (English, Russian, Traditional Chinese, Simplified Chinese and Japanese) are available for user interface.
Users can use the external software SpectrumShot for EMI test report management and assessment, remote control and waveform data recording for long periods of time. SpectrumShot can be applied to spectrum monitoring for detecting any abnormal radio signals. The software will send out e-mail to inform users if any abnormal situation occurs.
To summarize, GSP-9300 spectrum analyzer is a perfect, light, compact and economical measurement instrument. With height of 210mm and width of 350mm, GSP-9300 is suitable for automatic test systems. It can be mounted on the 19 inches 6U rack. The light and compact design of GSP-9300 is ideal for vehicle mounted operation to carry out field strength measurement such as monitoring satellite communications signals.
Standard Accessories
Power Cord, Quick Start Guide, Certificate of Calibration, CD-ROM (with User Manual, Programming Manual, SpectrumShot Software, SpectrumShot Quick Start Guide & IVI Driver)
Option
Option 01, Tracking Generator
Option 02, Battery Pack
Option 03, GPIB Interface
Optional Accessories
PWS-06, USB Power Sensor
GSC-009, Soft Carrying Case
GRA-415, Rack Adapter Panel
ADB-002, DC Block BNC 50 Ohm 10MHz to 2.2GHz
ADB-006, DC Block N-TYPE 50 Ohm 10MHz to 6GHz
ADB-008, DC Block SMA 50 Ohm 0.1MHz to 8GHz
ADP-001, BNC to N-TYPE Adaptor
ADP-002, SMA to N-TYPE Adaptor
Free Download
SpectrumShot PC Software for Windows System (available on GW Instek website)
GSP-9300 Remote Control APP for Android System (available on Google Play)
IVI Driver supports LabVIEW/LabWindows/CVI programming ( available on NI website)
GSP-9300
3GHz Spectrum Analyzer
GSP-9330TG
Spectrum Analyzer 3.25 GHz with Tracking Generator [Factory installed]
ADB-006
DC Block N-type 50Ω [GSP-9330/GSP-9300B]
ADB-008
DC Block SMA-type 50Ω [GSP-9330/GSP-9300B]
User Manual
The user manual of GSP-9300.
2018-01-04
User Manual
The GIT-5060 user manual
2018-01-04
User Manual
The GLN-5040A user manual
2018-01-04
User Manual
The GPL-5010 user manual.
2018-01-04
User Manual
The GKT-008 user manual.
2020-02-11
Video Link
The demo / operation video of GSP-9300. (@YouKu)
2018-01-04
Datasheet
The datasheet of GSP-9300.
2018-01-04
Brochure
The brochure of GSP-9300.
2018-01-04
Operation Manual
The Demo Guide of GSP-9300.
2018-01-04
Programming Manual
The programming manual of GSP-9300.
2018-01-04
Quick Start Guide
The Quick Start Guide of GSP-9300.
2018-01-04
Quick Start Guide
The PC Software, SpectrumShot, user manaul.
2018-01-04
PC Software
The PC Software, SpectrumShot, of GSP-9300.
2018-01-04
IVI Driver
The IVI Driver of GSP-9330/9300B/9300.
2018-01-04