PPH-1503D & PPH-1506D & PPH-1510D-Gwinstek

PPH-15xxD high precision measurement capability achieves the maximum resolution of 1mV/0.1uA and the smallest pulse current width of 33us that satisfy customers’ measurement application requirements of high resolution and pulse current. Fast load current variation will result in voltage sag for general power supplies that will have an impact on DUT’s internal circuit operation.

PPH-15xxD is equipped with the excellent transient recovery time, which can, in less than 40us, recover the output voltage to within 100mV of the previous voltage output when the current level changes from 10% to 100% of the full scale. Furthermore, conventional power supplies do not have sufficient response speed to promptly respond to set voltage value once the set voltage is changed. PPH-15xxD has a rise time of 0.2ms and a fall time of 0.3ms, which are 100 times faster than that of conventional power supplies.

Therefore, PPH-15xxD can provide DUT with a stable output voltage even when DUT is operating under large transient current output. The internal high-speed sampling circuit design of PPH-15xxD, with the sample rate of 64K, can conduct pulse current measurement without using a current probe and oscilloscope. The current read back accuracy is 0.2%+1uA (equals to 11uA) at 5mA range, and the read back resolution is 0.1uA that allow DUT to be measured with a high accuracy level.

Unlike battery, general power supplies, which do not have the characteristics of fast transient recovery time, can not maintain a stable power supply for cellular phone, wireless device, and wearable device which produce large transient pulse current load for hundreds of μs to dozens of ms when in use. PPH-15xxD, different from general power supplies, has the characteristics of fast transient recovery time. While simulating battery to output pulse current, PPH-15xxD can quickly compensate the voltage drop caused by pulse current.

PPH-15xxD’s CH1 has the built-in battery simulation function, which can define output impedance settings so as to accurately simulate battery’s impedance characteristics during battery discharge. Fast transient recovery time and built-in battery simulation function together facilitate PPH-15xxD to accurately simulate battery’s real behavior pattern so as to conduct product tests.

The specifications apply under the following conditions: The PPH-1503/1503D/1506D/1510D is powered on for at least 30 minutes, within +18°C~+28°C.

Model	PPH-1503	PPH-1503D		PPH-1506D		PPH-1510D
OUTPUT RATING
Number of output channel	1	2		2		2
Channel No.	Ch1	Ch1	Ch2	Ch1	Ch2	Ch1	Ch2
Power	45W	45W	18W	45W	36W	45W	36W
Voltage	0 ~ 15V or 0 ~ 9V	0 ~ 15V or 0 ~ 9V	0 ~ 12V	0 ~ 15V or 0 ~ 9V	0 ~ 12V	0 ~ 15V or 0 ~ 9V	0 ~ 12V
Current	0 ~ 3A or 0 ~ 5A	0 ~ 3A or 0 ~ 5A	0 ~ 1.5A	0 ~ 3A or 0 ~ 5A	0~ 3.0A	0 ~ 3A or 0 ~ 5A; Rear: 0~10A(under 0~ 4.5V)	0~ 3.0A
Output Voltage Rising Time	0.15ms (10% ~ 90%)	0.20ms (10% ~ 90%)		0.20ms (10% ~ 90%)		0.20ms (10% ~ 90%)
Output Voltage Falling Time	0.65ms (90% ~ 10%)	0.30ms (90% ~ 10%)		0.30ms (90% ~ 10%)		0.30ms (90% ~ 10%)
STABILITY
Voltage	0.01%+0.5mV	0.01%+3.0mV		0.01%+3.0mV		0.01%+3.0mV
Current	0.01%+50uA	NA		NA		NA
REGULATION (CV)
Load	0.01%+2mV	0.01%+2mV		0.01%+2mV		0.01%+2mV
Line	0.5mV	0.5mV		0.5mV		0.5mV
REGULATION (CC)
Load	0.01%+1mA	0.01%+1mA		0.01%+1mA		0.01%+1mA
Line	0.5mA	0.5mA		0.5mA		0.5mA
RIPPLE & NOISE (20Hz ~ 20MHz)
CV p-p	8mV	≦5A:8mVp-p(20Hz~ 20MHz)		≦5A:8mVp-p(20Hz~ 20MHz)		≦5A:8mVp-p(20Hz~ 20MHz) ＞5A: 12mVp-p(20Hz~20MHz)
CV rms	1mV	3mV(0~1MHz)		3mV(0~1MHz)		3mV(0~1MHz)
CC rms	NA	NA	NA	NA	NA	NA	NA
PROGRAMMING ACCURACY
Voltage	0.05%+10mV	0.05%+10mV		0.05%+10mV		0.05%+10mV
Current (CH1: 5A,10A/CH2:1.5A,3A)	0.16%+5mA	0.16%+5mA(5A/1.5A)		0.16%+5mA(5A/3A)		0.16%+5mA(5A/3A)
Current (500mA)	NA	0.16%+0.5mA	NA	0.16%+0.5mA	NA	0.16%+0.5mA	NA
Current (5mA)		0.16%+5uA		0.16%+5uA		0.16%+5uA
READBACK ACCURACY
Voltage	0.05%+3mV	0.05%+3mV		0.05%+3mV		0.05%+3mV
Current (CH1: 5A,10A/CH2:1.5A,3A)	0.2%+400uA(5A)	0.2%+400uA(5A range)	0.2%+400uA	0.2%+400uA(5A range)	0.2%+400uA	0.2%+400uA(5A range)	0.2%+400uA
Current (500mA)	NA	0.2%+100uA(500mA range)	NA	0.2%+100uA(500mA range)	NA	0.2%+100uA(500mA range)	NA
Current (5mA)	0.2%+1uA	0.2%+1uA(5mA range)	0.2%+1uA	0.2%+1uA(5mA range)	0.2%+1uA	0.2%+1uA(5mA range)	0.2%+1uA
RESPONSE TIME
Transient Response Time (Response to 1000% Load Chang)	< 40uS within 100mV < 80uS within 20mV	< 40uS (within 100mV, Rear) < 50uS (within 100mV, Front) < 80uS (within 20mV)		< 40uS (within 100mV, Rear) < 50uS (within 100mV, Front) < 80uS (within 20mV)		< 40uS (within 100mV, Rear) < 50uS (within 100mV, Front) < 80uS (within 20mV)

PROGRAMMING RESOLUTION
Voltage	2.5mV	2.5mV		2.5mV		2.5mV
Current	1.25mA	1.25mA( 5A range)	1.25mA	1.25mA( 5A range)	1.25mA	1.25mA( 5A range)	1.25mA
Current	NA	0.125mA(500mA range)	NA	0.125mA(500mA range)	NA	0.125mA(500mA range)	NA
Current	NA	1.25uA(5mA range)	NA	1.25uA(5mA range)	NA	1.25uA(5mA range)	NA
READBACK RESOLUTION
Voltage	1mV	1mV		1mV		1mV
Current	0.1mA( 5A Range)	0.1mA( 5A Range)	0.1mA(1.5A Range)	0.1mA( 5A Range)	0.1mA( 3A Range)	0.1mA( 5A Range)	0.1mA( 3ARange)
Current	NA	0.01mA ( 500mA Range)	NA	0.01mA ( 500mA Range)	NA	0.01mA ( 500mA Range)	NA
Current	0.1uA( 5mA Range)	0.1uA( 5mA Range)	0.1uA( 5mA Range)	0.1uA( 5mA Range)	0.1uA( 5mA Range)	0.1uA( 5mA Range)	0.1uA( 5mA Range)
PROTECTION FUNCTION
OVP Accuracy	50mV	CH1: 0.8V	CH2:50mV	CH1: 0.8V	CH2:50mV	CH1: 0.8V	CH2:50mV
OVP Resolution	10mV	10mV	10mV	10mV	10mV	10mV	10mV
DVM
DC Readback Accuracy ( 23℃± 5℃)	0.05%+3mV	NA	0.05%+3mV	NA	0.05%+3mV	NA	0.05%+3mV
Readbck Resolution	1mV		1mV		1mV		1mV
Input Voltage range	0 ~ 20VDC		0 ~ 20VDC		0 ~ 20VDC		0 ~ 20VDC
Maximum Input Voltage	NA		-3V, +22V		-3V, +22V		-3V, +22V
Input Resistance and Capacitance	100000MΩ		20MΩ		20MΩ		20MΩ
Programmable output resistance
Range	NA	0.001Ω to 1.000 Ω	NA	0.001Ω to 1.000 Ω	NA	0.001Ω to 1.000 Ω	NA
Programming accuracy		0.5% + 10 mΩ		0.5% + 10 mΩ		0.5% + 10 mΩ
Resolution		1mΩ		1mΩ		1mΩ
PULSE CURRENT MEASUREMENT
TRIGGER LEVEL	5mA ~ 5A, 5mA/step	5mA ~ 5A, 5mA/step	5mA ~ 1.5A, 5mA/step	5mA ~ 5A, 5mA/step	5mA ~ 3A, 5mA/step	5mA ~ 5A, 5mA/step	5mA ~ 3A, 5mA/step
HIGH TIME/LOW TIME/AVERAGE TIME	33.3us to 833ms, 33.3us/step	33.3us to 833ms, 33.3us/step		33.3us to 833ms, 33.3us/step		33.3us to 833ms, 33.3us/step
TRIGGER DELAY	0 ~ 100ms,10us/steps	0 ~ 100ms,10us/steps		0 ~ 100ms,10us/steps		0 ~ 100ms,10us/steps
AVERAGE READINGS	1 ~ 100	1 ~ 100		1 ~ 100		1 ~ 100
LONG INTEGRATION PULSE TIMEOUT	1S ~ 63S	1S ~ 63S		1S ~ 63S		1S ~ 63S
LONG INTEGRATION MEASUREMENT TIME	850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO time 16.7ms/steps(60Hz), 20ms/steps(50Hz)	850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO time 16.7ms/steps(60Hz), 20ms/steps(50Hz)		850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO time 16.7ms/steps(60Hz), 20ms/steps(50Hz)		850ms(60Hz)/840ms(50Hz) ~ 60s,or AUTO time 16.7ms/steps(60Hz), 20ms/steps(50Hz)
LONG INTEGRATION TRIGGER MODE	Rising, Falling, Neither	Rising, Falling, Neither		Rising, Falling, Neither		Rising, Falling, Neither
OTHERS
Output Terminal	Front / Rear Panel	Front / Rear Panel	Rear Panel	Front / Rear Panel	Rear Panel	Front / Rear Panel	Rear Panel
DVM Input	Front / Rear Panel	NA	Front Panel	NA	Front Panel	NA	Front Panel
RELAY CONTROL CONNECTOR	150mA/15V ，5Voutput, 100mA	150mA/15V ，5Voutput, 100mA		150mA/15V ，5Voutput, 100mA		150mA/15V ，5Voutput, 100mA
Operation temperature	0 ~ 40°C	0 ~ 40°C		0 ~ 40°C		0 ~ 40°C
Operation Humidity	≤ 80%	≤ 80%		≤ 80%		≤ 80%
Storage Temperature	-20˚ C ~ 70˚ C	-20˚ C ~ 70˚ C		-20˚ C ~ 70˚ C		-20˚ C ~ 70˚ C
Storage Humidity	< 80%	< 80%		< 80%		< 80%

PC REMOTE INTERFACES
(Standard)	GPIB / USB / LAN	GPIB / USB / LAN		GPIB / USB / LAN		GPIB / USB / LAN
CURRENT SINK CAPACITY
Sink Current Rating	2A(Vout≦ 5V);2A-0.1*(Vout-5)(Vout>5V)	CH1：0~4V: 3.5A 4~15V: 3.5A-(0.25A/V)*(Vset-4V)	CH2: 0~ 5V: 2A 5~12V: 2A-(0.1A/V)*(Vset-5V)	CH1：0~4V: 3.5A 4~15V: 3.5A-(0.25A/V)*(Vset-4V)	CH2: 0~ 5V: 3A 5~12V: 3A-(0.25A/V)*(Vset-5V)	CH1：0~4V: 3.5A 4~15V: 3.5A-(0.25A/V)*(Vset-4V)	CH2: 0~ 5V: 3A 5~12V: 3A-(0.25A/V)*(Vset-5V)
Memory
Save / Recall	5 Sets	5 Sets		5 Sets		5 Sets
Power
Input Power	90-264VAC ; 50/60Hz	90-264VAC ; 50/60Hz		90-264VAC ; 50/60Hz		90-264VAC ; 50/60Hz
POWER CONSUMPTION	150VA	160W		160W		160W
DIMENSIONS & WEIGHT
Dimensions	222(W) x 86(H) x 363(D) mm	222(W) x 86(H) x 363(D) mm		222(W) x 86(H) x 363(D) mm		222(W) x 86(H) x 363(D) mm
Weight	Approx 4.2Kg	Approx 4.5Kg		Approx 4.5Kg		Approx 4.5Kg
Product specifications are subject to change without notice. PLC=PowerLineCycle, 1PLC = 7ms for 60Hz operation, 20ms for 50Hz operation; Display OFF, Speed includes measurement and binary data transfer out of GPIB; PLC=1; STABILITY: Following 15 minute warm-up, the change in output over 8 hours under ambient temperature, constant load, and line operating conditions; The ground ring of the probe is pressed directly against the output ground of the power supply and the tip is in contact with the output voltage pin. Auto detected at power-up;

PPH-1503D & 1506D & 1510D (English Version) Click to download Specification

Accessories

CD (User manual x1), Quick Start manual x1, Test lead GTL-207A x1, GTL-203A x1, GTL-204A x1, Power cord (Region dependent)

Optional Accessories

GTL-246 USB cable, Type A – Type B

PPH-1503D High Precision Dual Channel Output DC Power Supply

PPH-1503D High Precision Dual Channel Output DC Power Supply2,676 Where to buy

PPH-1506D High Precision Dual Channel Output DC Power Supply

PPH-1506D High Precision Dual Channel Output DC Power Supply2,762 Where to buy

PPH-1510D High Precision Dual Channel Output DC Power Supply

PPH-1510D High Precision Dual Channel Output DC Power Supply3,249 Where to buy

User Manual

The user manual of PPH-1503D/PPH-1506D/ PPH-1510D.

2018-01-10

User Manual versionD.,EN 2.9 MB DOWNLOAD

Firmware

The Firmware of PPH-150xD Series

2024-01-04

Firmware version1.23., 【Member Only】 534 KB DOWNLOAD

Datasheet

The PPH-1503D datasheet, English version.

2018-01-10

Datasheet version1.,EN 626.9 KB DOWNLOAD

Brochure

The brochure of PPH-Series.

2018-11-06

Brochure version.,EN 1.72 MB DOWNLOAD

Quick Start Guide

The Quick Start Guide of PPH-1503D.

2018-01-10

Quick Start Guide version1.,EN 1.5 MB DOWNLOAD

PC Software

PPH Series PC Software

2024-05-06

PC Software version1.0.06., 997 KB DOWNLOAD

LabVIEW Driver

PPH-1503、1503D & 1506D LabVIEW Driver.

2018-01-09

LabVIEW Driver version1.0.1., 976.2 KB DOWNLOAD

Features