Features
- Output Voltage Rating : 80V/800V
- Output Power Rating : 400W~800W
- Constant Power Output for Multi-Range(V&I)Operation
- Series and Parallel Operation(2 Units in Series or 4 Units in
- parallel Maximum)
- Sequence function edited by PC will be controlled through power supply
- optional interface
- Standard Interafce: RS-232C / USB / Analog Control Interface
- Optional Interface: GPIB
- Output Power Rating : 400W~800W
The PSB-2000 series, which is a high power density, programmable and multi-range output DC power supply. There are six models in the series including one power booster unit. The PSB-2000 series has the output voltage of 0~80V and 0~800V, and the output power ranges of 0~400W and 0~800W. The multi-range output functionality facilitates flexible collocations of higher voltage and larger current under the rated power range. Both series and parallel connections can be applied to the PSB-2000 series to fulfill the requirements of higher power output range.
The PSB-2000 series provides three sets of preset function keys to memorize regularly used settings of voltage, current and power that users can recall rapidly. The sequence function, via RS232C, USB interface or optional GPIB interface, can connect with the computer to produce output power defined by sequence of a series of set voltage and current steps that are defined by the computer. This function is often used to establish a standard test procedure for the verification of the influence on DUTs done by the swiftly changing operating conditions.
The PSB-2000 series protects over voltage and over current. The power supply output function will be shut down to protect DUTs while the protection mechanism is triggered to function. When conducting battery charging operation, the Hi-W mode of thePSB-2000 series will prevent reverse current from damaging power supply. The PSB-2000 series provides analog control and analog monitor interfaces on the rear panel to control PSB-2000 output via the external voltage or to externally monitor voltage and current output status of power supply. PSB-2000 panel can be rotated 90 degree angle suitable for vertical or horizontal position to accommodate the ideal space utilization.
Standard Accessories
User Manual (CD) x 1
AC Power Cord x 1
External Control Connector (26pin)
Screws for output terminals on rear panel
Protection covers for output terminals on rear panel
Protection caps for output terminals on the front panel
GND Cable
USB Cable (For Model Number: PSB-2400L;PSB-2800L;PSB-2400L2;PSB-2400H;PSB-2800H)
Local Bus (For Model Number: PSB-2400L;PSB-2800L;PSB-2400L2; PSB-2400H;PSB-2800H)
Optional Accessories
PSB-001 GPIB Card
PSB-003 Parallel connection kit (for horizontal installation), Kit includes: (PSB-007 Joint Kit,Horizontal bus bar x 2 , PSB-005 x1)
PSB-004 Parallel connection kit (for vertical installation) Kit includes: (PSB-007 Joint Kit, Verical bus bar x 2, PSB-005 x 1)
PSB-005 Parallel Connection Signal Cable
PSB-006 Serial Connection Signal Cable
PSB-007 Joint Kit: Includes 4 joining plates, [M3x6]screws x 4 ; [M3x8]screw x 2;
PSB-2400L
400W Multi-Range Programmable Switching D.C. Power Supply
PSB-2800L
800W Multi-Range Programmable Switching D.C. Power Supply
PSB-2400L2
800W Multi-Range, 2-Channel, Programmable Switching D.C. Power Supply
PSB-2400H
400W Multi-Range Programmable Switching D.C. Power Supply
PSB-2800H
800W Multi-Range Programmable Switching D.C. Power Supply
PSB-2800LS
800W Slave (Booster) Unit For Current Extension Only
User Manual
PSB-2000 Series User Manual
2024-03-26
LinkVIeW Software Manual
LinkVIeW Control software for Power system
2024-11-13
Software
LinkVIeW Application software(Free of Charge) Must install NI-VISA before executing
2023-12-27
Sequence Quick Guide
The Sequence Quick Guide of PSB-2000.
2019-08-15
Brochure
PSB-2000 Series Brochure
2024-06-26
Datasheet
PSB-2000 Series Datasheet
2024-06-26
Operation Manual
PSB-2000 Sequence Operation Manual (Front Panel)
2018-01-09
Programming Example
Programming Example for PSB-2000 Series
2018-01-09
LabVIEW Driver
PSB-2000 LabVIEW Driver. (for LabVIEW 2012 or later)
2022-09-28
Programming Example
SEQUENCE EDITING TABLE for PSB-2000 Series.
2020-06-18
USB Driver
PSB-2000 Series USB Driver
2018-01-09