|
Some of our products have been phased out. We will not continue to keep these old product documents updated. If you need documents which are in some of these discontinued products, please find the corresponding models below. Thanks for your understanding. |
Spectrum Analyzers, Signal Sources
- Frequency Range: 9kHz ~ 1.8GHz
- RBW: 10Hz ~ 3MHz, 10Hz ~ 500kHz in 1-10 steps
- Sensitivity: -148dBm/Hz Typical @PreAmp On
- Built-in AM/FM Demodulation
- Bandwidth Zoom function
- RBW: 10Hz ~ 3MHz, 10Hz ~ 500kHz in 1-10 steps
- Frequency Range: 9kHz ~ 3GHz
- High Frequency Stability: 25ppb (0.025ppm)
- RBW: 10Hz ~ 10kHz in 1-3 steps, 10kHz ~ 1MHz in 10% adjustable steps
- Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
- High Frequency Stability: 25ppb (0.025ppm)
- Frequency Range 0.01Hz ~ 15MHz
- Maximum Frequency Resolution 10mHz
- Dual Displays Indicate Frequency and Amplitude
- Built-in 6 Digits Counter up to 150MHz/High Resolution
- Maximum Frequency Resolution 10mHz
- DDS Technique and FPGA Chip Design
- Frequency Range: 0.1Hz~10MHz
- High Frequency Accuracy: ± 20ppm
- Frequency Resolution : 100mHz
- Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz
- Frequency Range: 0.1Hz~10MHz
- Frequency Range : 0.2Hz ~ 2MHz
- Waveform : Sine, Triangle, Square, TTL Pulse
- Variable DC Offset Control
- Output Overload Protection
- VCF Input Function
- 1000 : 1 Tuning Range
- Waveform : Sine, Triangle, Square, TTL Pulse
- Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)
- Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)
- Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output
- External Voltage Controlled Frequency (VCF) Function
- Two-Steps (-20dBx2) and Variable Attenuator
- Built-In 6 Digits Counter with INT/EXT Function up to 150MHz(Except GFG-8215A)
- INT/EXT AM/FM Modulation (GFG-8219A/8255A)
- GCV Output for Synchronization (GFG-8219A/8255A)
- Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)
- Frequency Range: 9kHz ~ 3GHz
- High Frequency Stability: 0.025ppm
- 3dB RBW: 1Hz ~ 1MHz
- 6dB EMI Filter: 200Hz, 9kHz, 120kHz, 1MHz
- Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
- Built-in Measurement Functions: 2FSK Analysis, AM/FM/ASK/FSK Demodulation & Analysis, EMC Pre-test, P1dB point, Harmonic, Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO, Noise Marker, Frequency Counter, Time Domain Power, Gated Sweep
- Built-in Spectrogram and Topographic Display Modes
- 886MHz IF Output for User’s Extended Applications
- Remote Control Interface: LAN, USB, RS-232, GPIB (Optional)
- Built-in Preamplifier, 50dB Attenuator, and Sequence Function
- High Frequency Stability: 0.025ppm
- Frequency Range : 0.2Hz ~ 2MHz
- Coarse and Fine Tuning
- Waveform : Sine, Triangle, Square, TTL Pulse
- CMOS Output
- Built-In 4 Digits Counter (INT Only)
- Large 0.5" LED Display
- Variable DC Offset Control
- Output Overload Protection
- VCF Input Function
- Coarse and Fine Tuning
- Designed for wireless frequency range applications
- Includes a 880MHz Digital PLL and 2.4GHz microstrip line filter circuits
- Include these applications of RF Transmitter and Receiver both
- Training for the Voice Communication System
- Demonstrates the applications and measurements for using spectrum analyzers in communication instruments
- Specific RF circuit characteristics & PCB Layout on each module
- Training system covering 22 modules, and over 50 experiments
- Includes a 880MHz Digital PLL and 2.4GHz microstrip line filter circuits
- Low Noise Floor(-117dBm@1GHz, 3k RBW)
- Sequence Programming Functions
- ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
- 10 Markers with Delta Marker, Peak Functions
- Sequence Programming Functions
- Frequency range: 1uHz~25MHz
- 1uHz frequency resolution
- Built-in 120 MSa/s, 10 bit resolution and arbitrary waveform editing function with 4k point memory
- Dual channel models support coupling, tracking, and phase functions
- 1uHz frequency resolution
- Frequency Range: 150kHz ~1GHz
- Fully Digital Phase Locked Loop Technique Design
- High Frequency Stability:±10ppm
- RBW : 3K, 30k, 220k, 4MHz
- High Input Protection Level : +30dBm,±25VDC
- Reference Level Range : -30dBm~ +20dBm
- Two Markers for Absolute and Relative Measurement
- Support standard RS-232C Interface to connect with PC
- Options: Tracking Generator, Power Meter, Remote Control Software
- Fully Digital Phase Locked Loop Technique Design
Compare