C-1200 is an One Box Tester that incorporates LoRa TX and RX tests. It provides spectrum analysis, time domain, FEI (Frequency Error Indicator), and TOA (Time On Air) for transmitter tests, and sensitivity, BER (Bit Error Rate), and PER (Packet Error Rate) for receiver tests. In addition to Sub-GHz, C-1200 also supports the 2.4 GHz bandwidth and the FSK signal test. Users can also edit the transmitted payload by themselves. When receiving data, the formats include binary, HEX, and ASCII code, which allow data transmission results to be easily confirmed.

In addition to the signaling test of the finished product, C-1201 is a transfer box connecting C-1200 to LoRa module that directly controls the DUT to perform non-signaling tests on semi-finished products through UART/SPI/I2C interfaces.

• 1 Low Power TX Port and 3 RF TRX Ports (switching Type)
• The minimum output level of Low Power TX Power: -148 dBm
• Support full LoRa test demand
• Support LoRa/FSK modulation signals
• Support Sub-GHz and 2.4 GHz
• Complete PC Software and built-in MP Test function
• Built-in FCC 15.209/15.247 test regulations
• Built-in temperature control calibration signal
• Support SPI, UART, I2C interfaces to directly control DUT (Must collocate with IO Extension, C-1201)
• Simultaneously test DUT’s current consumption (Must collocate with PPH-1503 DC power supply)

Support Full LoRa Test Demand

 
Standard Rack Size

Complete Functionality PC Software 

One-station test requirement can be realized while C-1200 collocating with IO Extension and PPH-1503.

Traditional LoRa-Tx Test

Traditional LoRa-Rx Test

Power Consumption Test

Emissions in Restricted Freq. Bands (§15.209)

20 dB Channel Bandwidth (§15.247)

Emissions in Non-Restricted Freq. Bands (§15.209)